Air Shroud

This describes the procedure to install and remove the Air Shroud.

Removing the air shroud

CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data.

• Follow the safety guidelines listed in Safety instructions.

• Follow the procedure listed in Before working inside your system.

Follow the below steps to remove the Air Shroud:

Holding the blue touch points, lift the air shroud away from the system.

• If applicable, install the air shroud.

• Follow the procedure listed in After working inside your system.

Installing the air shroud

• Follow the safety guidelines listed in Safety instructions.

• Follow the procedure listed in Before working inside your system.

• If applicable, route the cables inside the system along the system wall and secure the cables by using the cable latch.

Follow the below steps to install the Air Shroud:

1. Align the tabs on the air shroud with the slots on the system.

2. Lower the air shroud into the system until it is firmly seated. When firmly seated, the memory socket numbers marked on the air shroud align with the respective memory sockets.

Follow the procedure listed in After working inside your system.